Forest Paint Mixed Blue Shining Silver Metallic Automotive Paint
Heat Resistant Adjustable Size
1k Car color paint car mix paint silver metallic mixed paint silver
plating / blue shining silver
1. silver pigment
2. high coverage power
3. adjustable size
4. good brightness and whiteness
Characteristics of aluminum paste:
Aluminum paste is made of high pure aluminum powder by special
grinding method; it can resist the corrosion, heat and insulation.
Used in roof coating, industrial coating, ink coating, specialty
coating, coil and can coating, decorative and reflective finishes
coating, aerosol finishes, hammer tone finishes coating, paper,
anti-corrosive coating, marine paint, metal furniture, plastic
coating, and etc.
|Chemical name:||1K Silver and Pearl Metallic Color|
|Substrates:||Dried and sanded old paint film, 2K acrylic primer, 1K grey primer|
|Wet-sanding:||P800-1000 sand paper;|
|Dry-sanding:||P600-800 sand paper|
|Surface cleaning:||Remove wax, silicone material and other impurities with degrease|
|Characteristic:||Make up a variety of weather resistant binders, high quality,
strong covering power. Good adhesion and adherence between coats.|
|Mixing ratio:||1k silver and pearl colors : WL1000 series thinner=1 : 1~1.2|
|Spraying tools and air pressure:|
Gravity feed spray gun 1.2-1.5mm 3-5kg/cm2
Suction feed spray gun 1.4-1.7mm 3-5kg/cm2
Remove wax oil and other impuritieswith deoiling detergent Examine
andassess the location and extent of damage.
2. Grind damaged parts
Grinding with abrasive paper(#80# 2000). Dry grinding
withsandpaper(#80, 120, 180) first.
3. Dust cleaning
Use a degreaser to remove greasefrom the workpiece.
4. Fill& Grind
Add thne hardener I proportionmix and fill the putty, Sanding(#80.
120, 180) after drying.
5. Clean &Grind
Clean the surface again, and thenfinely grind the filling to the
leveof the paint.
6. Spray primer surfacer
Mix and spray primer according toproduct requirements, each
layerneeds to be matte.
7. Grind primer surfacer
After the primer is dried, dry sandingpaper(3320-400)is used with
atwo-way sander. Manual grindingon the edge(#600-800)
8. Clean & Wipe
Use a cleaner to clean the grease.and tack cloth to clear of
9. Spray 1K color paint
Add thinner as requiredspray2-3ayers, spray interval of 5-10nutes
10. Spray Varnish(clear coat)
Add hardener and thinner asrequired, spray two layerseach interval
is 5-10 minutes.
11. Dry Bake
After the varnish is sprayed. it needbe allowed to stand for
10-15minutes can be baked or driednatur.
12. Waxing &Polish
Can be sanded with abrasivepaper(#2000)first if necessaryThen use
related products forwaxing and polishing
1.Brushed Silver Car Vinyl Wrap Automotive can be applied on the Vehicle, Motorcycle, Furniture, Cell Phone,
etc. Just use your imagination!
2, High quality removable glue, Do no harm to your car paint, no
residual glue would be left on the car after remove the vinyl.
3, Bubble Free design, make it easy to install.
4, Stretchable PVC material, this vinyl wrap can be repositioned and stretched with heat gun.
5, Protect your car from UV rays, Dirt, Grease, Mild Acids.
Decorate and protect your equipment.
Saft Precautions :
1. Keep container in a well ventilated and cool place
2. Keep away from fire
3. Avoid contact with eye and skin
4. Wear suitable gloves and eyes protection
5. Don't empty into drains
6. Against static discharges